$ € £ Cart: 0 products (empty) Log in Home Contact How Coupons Sitemap
A clean desk surface with a technical document binder and a tablet displaying a standards cover page, warm beige and charcoal tones, professional atmosphere

API 5L versus ASTM A106 for sour service

Selecting line pipe for a hydrogen sulfide environment requires more than matching a grade on a datasheet. API 5L and ASTM A106 describe different product families, and neither specification automatically makes carbon steel suitable for sour service. The correct choice depends on service conditions, welding controls, applicable regulations and the project specification.

Engineers therefore compare more than strength. They examine the pipeline design code, NACE MR0175/ISO 15156 sour-service limits, chemistry, hardness, weld performance, inspection and traceability. In Australia, those comparisons often sit alongside AS/NZS 2885, AS 4458 or ASME piping and pipeline requirements, making a documented, edition-controlled review essential.

Scope and product intent

API 5L specifies line pipe for pipeline transportation systems. It defines grades such as X42 through X80 and two Product Standard Levels: PSL1 and PSL2. PSL2 adds tighter controls for chemical composition, toughness, quality and testing. Pipe may be seamless or welded, with electric resistance welding and submerged arc welding common.

ASTM A106 is principally associated with seamless carbon steel pipe for high-temperature service, in Grades A, B and C. It is often used for process piping, utility services and other ASME applications, although project specifications may extend its use to pipelines. A106 Grade B is not a direct substitute for an API grade, and a line-pipe code may prohibit that interchange.

Strength, chemistry and weldability

A106 separates grades by specified mechanical properties. At common sizes, Grade B has minimum yield and tensile strengths of about 240 MPa and 415 MPa; Grade C rises to roughly 310 MPa and 485 MPa. API grades set their own minimum strength, and PSL2 also changes chemical and testing requirements. The higher number is not automatically the safer option.

For sour applications, chemistry and microstructure matter as much as nominal strength. Carbon equivalents, phosphorus, sulphur, alloying additions, grain structure and heat treatment affect weldability and resistance to hydrogen damage. Both standards permit carbon steel, but their base limits serve different purposes. NACE MR0175/ISO 15156 adds service-specific restrictions that must be checked separately.

Sour-service qualification

Hydrogen sulfide in water can cause sulfide stress cracking, while carbon dioxide can drive corrosion and alter material limits. Chlorides, pH, temperature and H2S partial pressure all influence risk. A stream described simply as sour may need different limits from one with similar nominal H2S but different water chemistry.

NACE MR0175/ISO 15156 is the key materials-selection reference for sour service. It defines SSC regions and environmental limits through tables based on H2S partial pressure, chloride content, pH and other conditions. Compliance is not granted by an API or ASTM designation. Each grade, heat treatment and weld condition must fall within applicable limits or receive separate qualification.

A common hardness ceiling for sour-service carbon steel is 22 HRC, subject to the NACE table, material condition and any exception. High-strength API grades may rely on alloying or thermomechanical processing that needs careful assessment for H2S exposure. Grade C or X70 should never be accepted merely because it meets the base material standard.

Welding and quality control

Welded line pipe introduces weld metal and the heat-affected zone into sour-service assessment. A valid pipe certificate does not remove concerns about local hardness or segregation. Welding procedures, filler selection, preheat, heat input, cooling and any post-weld heat treatment must be assessed for material qualification.

Traceability supports that assessment. Purchase documents should connect the pipe to the governing edition, grade, PSL, dimensions, chemical analysis, mechanical results, heat-treatment records and NDE. For seamless A106 pipe there is no longitudinal weld, but the base metal still needs chemistry, hardness and service checks. Inspection plans should state hold points, repair limits and document acceptance criteria.

Dimensions, testing and Australian practice

API 5L applies line-pipe dimensions and tolerances, while A106 pipe is commonly ordered by ASME B36.10M nominal pipe size and schedule. Australian documents may use SI units, yet NPS sizes, inch-based dimensions and schedules remain common in imported equipment and quotations. Procurement tables should state outside diameter, wall thickness, internal diameter and tolerance rather than relying on a grade label. Confirm pressure testing, NDE, impact and tensile testing, plus any supplementary sour-service qualification.

Project specifications can add inspection, documentation and material restrictions beyond either base standard, and those supplements often decide the outcome. Lock the current editions, corrigenda and addenda into the purchase and design package. Australian teams commonly move between client standards, AS/NZS clauses, ASME codes and API data sheets, so an uncontrolled PDF can create costly revision errors.

Real-world selection across Australia

Western Australia shows why service definition comes first. Offshore developments around Perth and the Browse Basin may handle gas containing H2S and CO2, while onshore facilities may use API line pipe or A106 piping under different rules. AS 4458, AS/NZS 2885, ASME B31.4 or B31.8 and client specifications may all appear in one project set.

Queensland’s Gladstone and Curtis Island LNG projects and coal seam gas fields add another context. Some feed gases are not sour, but CO2, chlorides or separation conditions can still control material selection. Australian teams often say a line is “sour-rated”, yet that shorthand does not show whether NACE limits, corrosion allowance, inhibitors or weld controls were assessed. A practical analogy from Australian farm operations reinforces the point: equipment must match actual site conditions, not merely carry a familiar label.

Building the procurement decision

Start with a requirement matrix covering the governing code, grade, PSL, dimensions, toughness, chemistry, hardness, welding, NDE, NACE applicability, coating and documents. Then decide whether the line is API line pipe, ASME process pipe or a hybrid permitted by the project specification. Often, service limits and weld controls matter more than whether the label reads API or ASTM.

Document Bays’ top-selling standards collection is a practical place to locate commonly requested API, ASTM and related codes. Australian teams can compare downloadable copies in AUD and place controlled copies into the project library, while still checking the publisher’s edition and licensing requirements.

The fastest route to a defensible comparison is to assemble the current API 5L, ASTM A106 and NACE/ISO 15156 documents named by the project specification, together with the governing Australian or ASME design code. Record the edition, amendment status and governing clauses in the design note so suppliers and inspectors work from the same requirements.

Choose the required editions in Document Bays’ catalogue, download the PDFs immediately, and give the project team a controlled, service-specific basis for procurement and qualification.

Quick Inquiry

Questions about an order or a specific standard? Use our contact form.

Contact Us

Secure payment with SSL

Featured Products

ANSI/ASHRAE

ANSI/ASHRAE 149-2013

$17.63 Add to Cart
ANSI/HI

ANSI/HI 11.6-2012

$40.85 Add to Cart
ANSI/ASSE

ANSI/ASSE Z690 Package

$60.20 Add to Cart
ANSI/ASHRAE

ANSI/ASHRAE 113-2013

$17.63 Add to Cart
ANSI/HI

ANSI/HI 14.6-2011

$83.85 Add to Cart
ANSI/ALI

ANSI/ALI A14 Standards Set

$645.00 Add to Cart

About Standards Store

We provide industry standards and codes in PDF format for immediate download. Our catalog spans engineering, manufacturing, construction, and quality management — with documents from over 50 issuing bodies worldwide.

Learn More

Latest Additions

Recently added standards include AWS D14.4/D14.4M-2019, API RP 581-2019, ISO/IEC 17025:2017, RTCA DO-363, and IPC/ECA J-STD-002E. Visit the New Standards section for the complete list.

New Standards

Secure Payment

All transactions are protected with SSL encryption. We accept Visa, Mastercard, and PayPal. Use coupon codes at checkout for additional discounts on eligible items.

Payment Info

Standards Store is dedicated to making technical standards and codes accessible to professionals worldwide. Every document in our catalog is delivered as a PDF for immediate download — no shipping, no waiting. We serve engineers, quality assurance specialists, manufacturers, and contractors who rely on accurate, up-to-date standards for their work.

Browse by issuing organization, explore new additions, or check our specials for discounted titles.

For questions about an order or for information about our products, please use the contact form below. Select the appropriate subject — Customer Service for order inquiries or Webmaster for technical issues with the website.

We aim to respond promptly to all inquiries.

Send a Message